Table of Contents
How will you proceed to move a pool table all by yourself without taking it apart? Well, this is somewhat a difficult question to answer if you plan to move it without tearing it down. You might feel the urgency to relocate your pool table either down stairs or to another room or someplace farther.
If you go through this article, you will find it that it is merely a DIY job that anybody could do, provided that you are doing it the right way. If you want to move your pool table, then carefully and thoroughly go through all the steps mentioned below.
These steps are the answer to the question how to move a pool table?
STEP 1: Start by tearing down the parts of the pool table
This is the only way to move your pool table with ease and convenience. Start with the pool table legs. As you might know, that pool tables are really heavy doesn’t matter what kind you have.
They are made from high-quality wood and components and an average weight of the pool table pegs nearly around 600 pounds. So, unscrew the legs first and then go for the leaves. When you take the parts apart, it becomes lighter and easy to move.
Here comes the warning! If you are doing it all by yourself, make sure that you know how to put it back together. So label every part of the pool table and watch out for those missing screws, you don’t want to end up running to the hardware store.
On the other hand, you have to make sure that you unfasten the six side pockets carefully. In some pool tables they are put together with screws while in others, they are just stapled in.
Down to the rails, it is recommended to own a socket wrench if you own a pool table. You can use the wrench to hold the rails while you are unscrewing the bolts.
Again! Do not forget to label all the parts and components that you have taken apart. It is a tedious task so there is no shame in asking for help from a friend or a family member.
STEP 2: The most Challenging – The FELT
Whether you own a 3 piece slate pool table or a 1 piece slate pool table, removing the felt from the slate is the most difficult task.
While disassembling the pool table, it is necessary to remove the felt as well because it reduces the chances of your pool table getting damaged during relocating or transportation.
Antique pool tables, on the other hand, are the toughest to disassemble especially with the felt. If you own an antique piece, then it is recommended that you call an expert on this one.
It becomes easier if you plan to rip off the felt, you can always buy a new one. But if you plan on to using the same felt, try to remove the staples carefully. One wrong move and you will be visiting the hardware store for purchasing a new felt.
STEP 3: Why so Heavy – The SLATE
Okay, if you have reached this step without any complications then Kudos to that. Now you will be asking the question how to move a pool table which is so heavy?
For this part, two hands won’t do the trick, you will need multiple hands. Gather 4-5 people or more if you could to perform this step. Let me remind you something, pool table slate replacement might cost you a fortune, so be easy with the slate.
Even if the slate gets disassembled into multiple pieces, each piece could weigh more than a hundred pound. So, you will be requiring a hearty crew and watch your back while lifting the slate.
Now, if you are planning to relocate the pool table to another room, then you don’t have much work to do. However, if you are relocating the table to another part of the city, then you will have to protect the pool table components and parts to make it ready for transportation.
Wrap the components with something safer like a bubble wrap or a component similar to that. Put all the small components and parts like screws and bolts together. Wrap the legs and rails properly and place it inside the truck in a way that it won’t move much while the truck is moving.
The frame should be placed carefully inside the truck. Place it flat on the truck so that it won’t move much while the truck is struggling with the traffic.
Remember one thing; it is difficult to find the similar pieces of a pool table because most of them are custom made. So try not to damage the components while your pool table transport.
STEP 4: Finding the right ROOM
This may sound simple, but it can really give you a hard time if you are not satisfied with the room that you have put it. You can look for pool table plans before deciding the right room for your table.
Pick up a suitable space keeping in mind the VISUALIZATION. Pick a place where you find that your pool table feels compatible.
STEP 5: Put it back altogether
This is when all your hard work of labeling the components comes into the play. Start with the frames and legs. Place the frame upside down so that you can easily fix the legs. For flipping the table in its actual position, you will need a helping hand.
Now, slowly place all the components one by one and screw them if necessary. While placing the rails, you have to make sure that it doesn’t form any creases.
This whole dissembling then moving, transportation and then again reassembling might take a lot of time. So, you are required to go through all the process with patience. I hope you got the answer of how to move a pool table?
On the other hand, $200 to $600 is the cost to move a pool table if you hire a professional for that. It is always easy and simple if you let the professionals handle everything. They make things hassle-free.
If you have any queries regarding, you can always ask us. We are always happy to answer.